• Contact

Powder Coating Units

The Powder cup kit, this easy to carry unit is ideal for changing Coating application on site, for small batch sizes, the colo-800T-C ideal for all user who only want to apply small quantities of Coating Powder, powderful integral high voltage cascade 100kc netative, very good application effect due to very short Powder delivery travel.

• Contact

Copy Model Powder Coating Equipments

Manual Powder Coating Equipment-COLO-800. Technical data. Electrical data. Power range: 220V/110. Frequency: 50HZ /60HZ. Temperature range in use: -10 +50. Powder Gun. Gun weight: 500G. Rated output voltage: 24VDC. Input voltage: - 200kv. Maximum output current: 180Ua(max). Maximum output voltage: 0-100KV (adjustable). Maximum Powder injection: 600g/min. Polarity: negative (-). Pneumatic data. Maximum input-air pressure: 10kg/cm. Optimum input-air pressure: 6kg/cm. Minimum input-air pressure: 4kg/cm. Maximum water vapor content or compressed air: 1.4g/N m3. Maximum oil vapor content of compressed air: 0.1ppm. Maximum compressed-air consumption: 13.2 m3/h.

• Contact

Manual Powder Coating Systems

(Direct box feed). The vibratory box feeder model supplies Powder direct from the manufacturer's shipping container for fast color change operations. Gives improved safety, efficiency of charging, minimum surface disruption and unrivalled recoatability. Colour changes in seconds - simply unclip the venturi, remove the suction tube and blow clean. Vibrating chassis - mounted at an angle in two planes so that Powder is extracted from the lowest point ensuring maximum Powder utilisation. Accepts all popular Powder containers up to 25kg (55lbs). Controlled Powder support arm simply lifts clear to a position for fast box replacement when changing colours. Can be supplied as a single or double operator unit. Box feed unit may also be configured for automatic Powder guns.

• Contact

Meshing (Recovering) Powder Equipments

Sieving machine. Equipment for meshing (recovering) Powder. "Powder sieving machine- Used in Powder Coating area, to go with the Automatic reciprocator. To recycling the Powder lost in the process of electrostatic Powder Coating on metallic workpieces.

• Contact

Electrostat Powder Coating Equipments

Manual Powder Coating system (direct box feed). This units working directly the Powder boxes and suitable for multicolor user customers in a day. High efficiency. Vibration to minimize Powder compaction.

• Contact

Powder Coating Plants

Powder Coating line design service. We provide professional service of designing, manufacturing, assembling, commissioning and training in the Coating industry. We have built up many projects in China and abroad, we are able to "right-sizing" your Powder Coating system.

• Contact

Powder Keg Powder Coating Machines

Powder keg Powder Coating machine Character: Intelligent, one button for different workpiece shapes. Such as flat, complicate and recover. Small keg, 1L, easy to take and change color. Good for small working or lab test working. CE certificate! ISO 9001 certificate

• Contact

Powder Coating Systems (Laboratory Test Units)

Electrostatic Powder Coating Equipment. For laboratory tests, it is small cup type hopper and use at sample Coating of small quantity at laboratory. Discharge rate control by simple operation. Spraying Powder evenly automatically. Coating Powder quantity by 20~250g. Cleaning is easy and convenient to separate.

• Contact

Intelligent Powder Coating Equipments

User-friendly and powderful. Reliable, safe control unit. Main componets: stable Equipment trolley, colo-800 intelligent control unit, 55 liter stainless steel container and super Powder injector. Advantages and characteristics All parameters of Powder electrostatic spraying are intelligently controlled by computers Control programs are selected by keys Select any program among flat work—piece, dead angle work piece , respray work piece , by the keys , the electrostatic high pressure and electrical current are to be automatically set at the optimal valves which provide the electrostatic parameters necessary for the best Powder utilization rate when spraying on different shapes of work piece In this way , the faraday effects in operation of corona electrostatic spray machines are...

• Contact

Pulsed Powder Coating Equipments

electrostatic Powder Coating Equipment Minimize back-ionization. Consistent film thickness. Powder is carried to recessed or faraday cage areas. Reduces Powder build-up at closest points. HVLC - high voltage, low current. No gun voltage adjustment necessary. One mode, six functions. All recoats. Optimal transfer efficiency. Better penetration. Smoother finishes. Ultra thick coatings. Metallic powders. Also, you will find Pulse Power...simple. Operator friendly.

• Contact

Powder Coating Spray Equipment With Vibrators

Electrostatic Powder Coating machine. Electrostatic Powder Coating Equipment. Powder coater. Powder Coating unit. Powder Coating set. manual spray gun system. OEM and ODM orders are accepted.

• Contact

Electrostatic Powder Coating Equipments

Electrostatical Powder Coating device ITW Gema, degree of protection IP54, input power 60VA, input voltage 100/110/120/200/230/240Volt 50/60 Hz, with manual gun GEMA Type PG 1 output 98 KV max.

• Contact

Manual Powder Coating Equipments

1. CE certificated. 2. Gema copy style. 3. Advanced design. 4. Easy operation/ fast delivery manual Powder Coating Equipment, Gema copy Powder Coating machine the model: COLO-500 is a tradition style generator. Simple, generous-looking. The best choice for skilled worker. Good quality and competitive price. Nowdays, electrostatic Powder Coating Equipment is getting more and more popular. Human increase themselves with the idea of enviroment-friendly, which makes Powder Coating widely used in industry, machinery, hardwares, automobile industry etc.

• Contact

Electrostatic Powder Coating Spray Gun Machines

Electrostatic manual Coating Equipment. Hopper model (colo-800-2) with one-touch intelligent operation button, working good in flat parts, complicated parts, recoat parts, it deliverys smooth finishes even with metallic Powder.

• Contact

Portable Powder Coating Equipments

protable Powder Coating unit: COLO-T-H are designed for Powder manufacture or small Coating working, with 4L fluidizing hopper, suitable for the laboratory and it can change the colors quickly and conveniently, it also can be used on the work table along with the frame to achieve small batch production.

• Contact

Powder Coating Systems (Laboratory Test Units)

Electrostatic Powder Coating Equipment. For laboratory tests. It is designed for Powder manufacturer; Powder cup with the self fluid function can be used for the Coating of 125gram Powder. It can be used as partial spay and test in the production line.

• Contact

Powder Coat Coating Gun Systems

100Kv controller with adjustments. Industrial Powder Coating gun. All cables, air hoses, and connections. Industrial grounded Powder hose. 1 - extension wand/electrode. 1 - multi coat nozzle. 1 - round spray electode (with 6 different deflector cones). 1 - Powder hopper.

• Contact

Small Powder Coating Systems

Summary of benefits: Guaranteed 0- 100 KV adjusted voltage Powder Coating gun Light weight one piece, moulded 100 KV gun. Entire range of nozzles to select from for highest transfer efficiency. Ideally suited for small Powder trial and small production requirement. Can be upgraded to full scale production Sprayright model by adding basic accessories.

• Contact

Home Powder Coating Systems

1. Character: intelligent type, there is a button display on the controller, it easy to control it to spray different workpieces. 2. Compose: 1pc controller+1pc common gun(optiselect manual Powder gun)+1pc mini stainless steel Powder hopper (dia 20x40cm). 3. We can accept the pay by bank, Wesertn union and paypal more quantity and lower price.

• Contact

MPS Manual Powder Systems (With PG1 Powder Gun)

Control unit interchange with original PGC1 controller. PG1 Powder gun can be as original PG 1 Manual gun replacement. Same function, time lower prices.