Chung Sing Machinery Co., Ltd.
CNC Vertical Machining Center, CNC Milling Machine, Horizontal Boring Machine.
Detail Information
Description :
Standards :
* Spindle oil cooler
* Centralized auto lubrication system
* Programmable coolant system
* Programmable air blow
* Air conditioner for cabinet
* Work lamp
* Chip auger for table
* M30 Automatic power off
* Portable MPG handwheel
* Alarm lamp
* RS-232 interface port
* Tool box with adjustment tools
* Leveling blocks and bolts
* Heidenhain Absolute Linear scales on X,Y,Z and W-axis
* Heidenhain Absolute angle encoder on B-axis
Options :
* Table splash guard cover
* Coolant thru spindle
* Chain type chip conveyor with bucket
* Transformer for input not 220V
Specification :
| ITEM | UNIT | HB-110-20T | |
| Table | |||
| Table size | mm | 1200x1500 | |
| T slot ( wide x no . x pitch ) | mm | 22H8 x 7 x 150 | |
| Max. load capacity | kg | 5000 | |
| Auto indexing | deg | Min. input 0.001 Every 90 deg with locating pin | |
| Table height from ground | mm | 1050 | |
| B-axis rapid feed | rpm | 2 | |
| Travel | |||
| X-axis travel | mm | 2000, 3000(opt) | |
| Y-axis travel | mm | 1500 | |
| Z-axis travel | mm | 1400 | |
| W-axis travel | mm | 550 | |
| Spindle nose to table center | mm | -130 ~ 1920 | |
| Spindle center to table top | mm | 0 ~ 1500 | |
| SPINDLE | |||
| Spindle nose | mm | BT 50 | |
| Spindle diameter | mm | 110 | |
| Max. torque of spindle | kg-m | 135 | |
| Speed/ 2 steps (auto) | Lo-speed | rpm | 5 ~ 625 |
| Hi-speed | 626 ~ 2500 | ||
| FEEDS | |||
| Rapid X, Y, Z, W-axis | m/min | 10/10/10/5 | |
| Feed rate of X, Y, Z axis | mm/min | 1 ~ 5000 | |
| Feed rate of W-axis | mm | 63/10 | |
| W-axis ballscrew (Dia./ Pitch) | mm | 40/10 | |
| A.T.C | |||
| Magazine capacity | pcs | 60 | |
| Pull stud | - | MAS-P50T-1 | |
| Max. tool length | mm | 400 | |
| Max. tool weight | kg | 25 | |
| Max. tool diameter | mm | 125/250 w/o adjacent tools | |
| Tool selection | - | Sequence by shortest path | |
| Tool change time (approx.) | sec | 13 | |
| MOTORS | |||
| Spindle motor | kW | 22 / 26 | |
| Servo motor for X/Y/Z/B | kW | 6/6/6/7/7 | |
| Centralized lubrication pump | W | 150*2 | |
| Hydraulic pump | kW | 3.7 | |
| Spindle oil cooler pump | kW | 1.18 | |
| Coolant pump | kW | 1.34 | |
| GENERAL INFORMATION | |||
| Pneumatic required | kg/cm2 | 6 | |
| Coolant tank | L | 250 | |
| Machine dimension | mm | 4480x5510x3720 | |
| Machine weight | kg | 24000 | |
| CNC contral | - | Fanuc 0i-MD | |
Chung Sing Machinery Co., Ltd.
- Taiwan
- No. 1, Fenggong 3rd Rd., Shengang Dist., Taichung City 429, Taiwan
- 886-4-25252723
- 886-4-25270957