Jiuh Yeh Precision Machinery Co., Ltd.
Taiwan Manufacturers, Exporters.
Detail Information
Description :
1. The bed, column, saddle and table are manufactured from high quality meehanite cast iron, stress relieved for high stability.
2. All slideways are hardened, precision ground, then coated with turcite-b for maximum wear resistance.
3. The X, Y axes are protected by stainless steel telescopic covers.
4. The X, Y axis drive employs high precision lead screws, combined with double nuts, ensuring high accuracy of feed.
5. The spindle runs on precise angular contact bearings.
6. The spindle is precision manufactured from SCM21 alloy steel, heat treated and precision ground.
7. All gears in milling head are hardened and precision ground for quiet running.
8. The X-axis feed is driven by a high torque servo motor, providing variable feed speed.
9. The powerful spindle motor gives a high chip removal rate.
10. Choice of fanuc or mitsubishi CNC controller.
11. All models can be converted into CNC controlled system.
Specification :
| Model | VH450 | ||
|---|---|---|---|
| Table | Table size | mm | 1500x450 |
| X axis travel | mm | 1100 | |
| Y axis travel | mm | 720 | |
| Z axis travel | mm | 780 | |
| T-Slot(width x trough number x pitch) | mm | 18x3x80 | |
| X Feedrate (variable) | mm/min | 25~1500 | |
| Y Feedrate (variable) | mm/min | 25~1500 | |
| Z Axis feedrate (variable) | mm/min | 25~1500 | |
| X Axis Rapid travel | mm/min | 1500 | |
| Y Axis Rapid travel | mm/min | 1500 | |
| Z Axis rapid travel | mm/min | 1500 | |
| Range of cutting reference | Cutting length (parameter) | mm | 1100 |
| Cutting width (parameter) | mm | 420 | |
| Cutting height (parameter) | mm | 500 | |
| Loading weight (parameter) | kgs | 1000 | |
| Spindle (Vertical) | Spindle speed R.P.M(60HZ) | RPM | 45~1500(Variable speed) |
| Spindle taper | (NT50) | ||
| Distance of Spindle nose to table surface | mm | 0~617 | |
| Distance of spindle center to column | mm | 450 | |
| Spindle (Horizontal) | Spindle speed R.P.M(60HZ) | RPM | 45~1500(Variable speed) |
| Spindle taper | NT50 | ||
| Distance of Spindle center to table surface | 0~780 | ||
| Distance of spindle nose to table surface | 190 | ||
| Power | Spindle motor | 10HPx4P AC | |
| X axis feed motor | 1 HP x4P | ||
| Y axis feed motor | 1 HP x4P | ||
| Z axis feed motor | 1 HP x4P | ||
| Packing Dimension | LxWxH (after packing) | mm | 2750x2030x2550 |
| Net weight (before packing) | kgs | 4200 | |
| Gross weight (after packing) | kgs | 5000 | |
Jiuh Yeh Precision Machinery Co., Ltd.
- Taiwan
- No. 195, Gongye 11th Rd., Ta Li Industrial Park, Ta Li Dist., Taichung City 41280, Taiwan
- 886-4-24915298
- 886-4-24915301
-
