Description :
The Continuous Wire Drawing Machine is a multi drum, multi-die wire drawing machine which is equipped with drawing and colling function. The drum is casted with friction resistant material. The surface is ground by spot welding and internal side treated by compulsory water cooling device. The die box is equipped with pressure die for better lubrication and equipped with water cooling device. The gears in the high speed operation with lower noise and high efficiency. The drum speed is controlled by inverter for carrying out non-section speed shift and thus, applicable for drawing steel wires, stainless steel wires, and aluminum-copper wires, etc.
Specification :
| Model | YTD-600SG5/*(N)+ABCD-600G or +ABCD-600B | YTD-600SG5/*(N)+ABCD-600G or +ABCD-600B |
| Drawing material | Low, or medium carbon steel |
| Drawing capstan die | 600 MM | 600 MM |
| Wire inlet dia. | Mild 8.0~6.5 | Hard 6.5~5.5 | Mild 6.5~5.5 | Hard 6.5~5.5 |
| Wire final dia. | 2.4~2.0 mm | 2.3~1.8 mm | 1.8~1.5 mm | 2.3~1.8 mm |
| Drawing speed (M/Min) | 530~700 | 530~700 | 535~800 | 535~800 |
| Power required / Block | 50HP | 50HP | 40HP | 40HP |
| Model | YTD-600SG3/*(N)+ASD-600B | YTD-600SG3/*(N)+ASD-600B |
| Drawing material | Low carbon steel | Stainless steel |
| Drawing capstan die | 600 MM | 600 MM |
| Wire inlet dia. | Mild 6.5~5.5 | Hard 6.5~5.5 | 6.5~5.5mm |
| Wire final dia. | 2.0~1.65 mm | 2.0~1.65 mm | 2.3~2.0 mm |
| Drawing speed (M/Min) | 400~600 | 535~800 | 200~300 |
| Power required / Block | 30HP | 40HP | 25HP~30HP |
| Model | YTD-400SG2/*(N)+ABCD-400B | YTD-400SG2/*(N)+ASD-400B |
| Drawing material | Low, medium or hight carbon steel | Stainless steel |
| Drawing capstan die | 400 MM | 400 MM |
| Wire inlet dia. | Mild 3.5~3.2 | Hard 3.0~2.7 | 2.7~2.0mm |
| Wire final dia. | 1.1~1.0 mm | 0.9~0.8 mm | 1.0~0.7 mm |
| Drawing speed (M/Min) | 600~800 | 600~800 | Max.800 |
| Power required / Block | 25HP~30HP | 25HP~30HP | 25HP~20HP |
