Jashico Machine Manufacture Co., Ltd.
Manufacturer of Industrial Machinery and Equipments.
Detail Information
Description :
Tailstock-
* Quill travel mm(in): 95(3-3/4)
* Quill diameter mm(in): 34.5(1.358)
* Quill taper: M.T.#2
Specification :
| MODEL | 1118HCNC | |
| Swing over bed | mm(in) | 280(11) |
| Swing over carriage | mm(in) | 220(8.65) |
| Swing over cross slide | mm(in) | 70(2.75) |
| Distance between centers | mm(in) | 475(18) |
| Cutting tool size | mm(in) | 12.7(1/2) |
| Gang tooling slide | mm(in) | 305*152 (12*6) |
| Cross slide width | mm(in) | 178(7) |
| Spindle | ||
| Spindle hole through | mm(in) | 32(1-1/4) |
| Bar capacity | mm(in) | 17.5(11/16) |
| Chucking capacity | ||
| Jaw chucks | mm(in) | 127(5) |
| Step chucks | mm(in) | 27(1-1/16)-152(6) |
| Round 5C collets | mm(in) | 27(1-1/16) |
| Hex 5C collets | mm(in) | 22(7/8) |
| Square 5C collets | 19(3/4) | |
| Spindle nose taper (inside) | 5C(10deg) | |
| Spindle nose taper (outside) | 4deg, Hardinge Type | |
| Spindle speed (programmable) | rpm | 0-4000 |
| Pneumatic collet closure with foot control | 標(biāo)準(zhǔn)配備Yes | |
| Motor | HP(KW) | 5(3.7) |
| Travel,Feedrate, Drive System | ||
| Carriage travel (Z-axis) | mm(in) | 285(11.2) |
| Cross slide travel (X-axis) | mm(in) | 220(8.65) |
| Maximum feed rate | m/min(ipm) | 5m/min(200) |
| Rapid traverse | m/min(ipm) | 10m/min(394) |
| Motors for X. Z axis | HP(kw) | 1(0.75) |
| Ballscrews diameter-X Axis | mm(in) | 20(3/4) |
| Ballscrews diameter-Z Axis | mm(in) | 25(1) |
Jashico Machine Manufacture Co., Ltd.
- Taiwan
- No. 99-1, Qingguang Rd., Wujih Dist., Taichung City 414, Taiwan (R.O.C.)
- 886-4-23350803
- 886-4-23350781