Ares Machinery Co., Ltd.
Tel:886-4-24925555 Fax:886-4-24966959
Address:No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
Detail Information
Description :
?Spindle speed STD. 10000rpm
OPT. 12000rpm
15000rpm
20000rpm
24000rpm
?Spindle motor M70V-B 5.5/3.7kw
0iMD 5.5/3.7kw
?Rapid traverse X,Y,Z: 48/60/48 m/min
?X axes travel 400mm
?Y axes travel 450mm
?Z axes travel 380mm
?Magazine capacity 24+1
?ATC time (T-T) 2.5sec
?Table size 400*400mm
Specification :
| Unit | H4030 | ||
| Table size | mm | 400 × 400 | |
| Max. Table load | kgf | 200 | |
| Max. Workpiece dimension (Ø x Height) | mm | Ø480 × 540 | |
| Min. Indexing precision of table | degree | 0.001 | |
| Cumulative indexing precision of table | sec | 20 | |
| Table repeatability accuracy | sec | 4 | |
| X,Y, Z axis travel | mm | 400 × 450 × 380 | |
| X,Y, Z axis rapid traverse | m/min | 48 / 60 / 48 | |
| 3 axes bidirectional accuracy of positioning | mm | 0.005 / 300 | |
| 3 axes bidirectional repeatability of positioning | mm | ±0.003 | |
| Spindle speeds | rpm | 10000 | |
| Spindle taper | BT30 | ||
| Pull stud | MAS 403 P30T-1(45°) | ||
| Spindle driving | Direct-drive | ||
| Spindle center to surface of table | mm | 90~540 | |
| Spindle nose to table center | mm | 190~570 | |
| Spindle motor | Mitsubishi | kw | 5.5 / 3.7 |
| FANUC | kw | 5.5 / 3.7 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Y drive motor | Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 | |
| Z drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| B drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Magazine capacity | no. | 24+1 | |
| Max. Tool weight | kg | 4 | |
| Max. Tool length | mm | 200 | |
| Max. Tool diameter | mm | 80 | |
| Atc time (T-T) | sec | 2.5 | |
| Tool change type | Arm type | ||
| Tank volume | l | 200 | |
| Coolant pump rate | w | 600 x 2pcs | |
| Flow rate | l/min | 136 | |
| Chip flush type | Flushing type | ||
| Auto. chip conveyor | OP | ||
| Net weight | kg | 3700 | |
| Floor space | mm | 1835 × 2593 × 2407 | |
* Tool change time supplied with standard 60Hz power and based on Mitsubuishi controller. For electrical requirements other than this standard, please contact one of our personnel.
Ares Machinery Co., Ltd.
- Taiwan
- No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
- 886-4-24925555
- 886-4-24966959