Ares Machinery Co., Ltd.
Tel:886-4-24925555 Fax:886-4-24966959
Address:No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
Detail Information
Description :
?Standard spindle speeds 8000 rpm
?Optional spindle speeds 12,000 /15000 rpm
?Rigid Tapping 3000 rpm
?Spindle nose taper BT40
?3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
?Fully enclosed heat isolated electric cabinet
?High Speed Arm-type ATC time T-T: 2.2 sec
?Directly coupled spindle drive system
Specification :
| Unit | A6040 | ||
| Table size | mm | 700 x 410 | |
| Max. Table load | kg | 250 | |
| X, Y, Z axis travel | mm | 600 x 400 x 600 | |
| Table to spindle nose | mm | 150 ~ 750 | |
| Spindle taper | BT40 | ||
| Pull stud | MAS403 P40T-1 (45º) | ||
| Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
| FANUC | kw | 7.5 / 5.5 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Y drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Z drive motor | Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 | |
| Spindle speeds | rpm | 8000 | |
| X, Y, Z axis rapid traverse | m/min | 48 / 48 / 48 | |
| Magazine capacity | no. | 24+1 | |
| Max. tool weight | kg | 5 | |
| Max. tool length | mm | 250 | |
| ATC time | sec | 2.2 (T-T) | |
| Net weight | kg | 3700 | |
| Floor space | mm | 1800 x 2750 x 2785 | |
* Tool change time supplied with standard 60Hz power and based on Mitsubuishi controller. For electrical requirements other than this standard, please contact one of our personnel.
Ares Machinery Co., Ltd.
- Taiwan
- No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
- 886-4-24925555
- 886-4-24966959