Description :

1. G-force GPS vehicle tracker is designed for real-time tracking of special fleets, such as petrol delivery or gas delivery fleets. This revolutionary GPS vehicle tracking solution not only prevents accidents from monitoring drivers' driving habit, but also helps them to cut back fleet management costs considerably.
2. During day-to-day operation, the tracker automatically warns both the driver and the control center if bad driving behavior, such as sharp turn, harsh brake and sudden acceleration, occurs. The control center can also communicate with the driver by hands free microphone & speaker for preventing accidents. When an accident actually happens, the unit will send messages to the control center immediately to report the situation.
3. It is a necessity also for the insurance company to help identify the one responsible for insurance claim to reduce the investigation time and loss with the most powerful evidence. This solution applies to transportation company, rental car company, fleet owners, and insurance projects.
4. G-force GPS vehicle tracker really is an ideal GPS surveillance solution for fleet monitoring and accident preventing.
(1) Features: fleet monitoring.
(2) Cutting back administration cost.
(3) In time driving behavior adjustment.
(4) Preventing accidents.
5. Intensive data reporting and recording when there is abnormal G force value.
6. Complete package:
(1) G-force sensor and recorder box.
(2) G-force LED indicator.
(3) R-9 GPS vehicle tracker set.
(4) Hands-free microphone & speaker, I-button set.
(5) Web-101 web-based software.

Specification :

1. Hardware specification for G-force recorder: (1) Power input +7 Volt to +37VDC. (2) On board back-up battery 5V 0.33F super cap). (3) SD card slot for data backup (up to 2GB). (4) 4 LED indicators on two RJ45 connectors. (5) On board real-time clock. (6) Serial input for GPS signal (9600 Baud rate) on RJ45. (7) Serial I/O port for external communication (9600 Baud rate) on RJ45. (8) G-force sensor with selectable sensitivity for 3 axes (+-1.5g/+-6g ). (9) 6-LED G-force strength display with buzzer (optional) on RJ45. (10) One internal GPS module (optional). 2. Firmware G-force detection & recording: (1) 3 axes G-force detection and record. (2) Recording interval: a. Normal: 1 sec (configurable). Range: 0.1~ 25.4 sec. b. Emergent: .1 sec (Max). 3. GPS (built-in or external) recorder: recording interval: 5 sec (configurable). Range: 1~600 sec. 4. Alarm to the driver: (1) LED: G-force strength displaying. (2) Buzzer: activate by abnormal G-force. 5. R9 coordination: (1) Save GPS data from R9. (2) Configuration by commands from R9. (3) Send recorded data to R9 for real time monitoring via GSM (SMS/GPRS). 6. Anti-fake for logs: checksums for logs. Not impossible, but difficult enough to fake the logs. 7. Supported storage: (1) Micro SD. Max 2GB. (2) FAT16/32 supported. 8. Setup tool: (1) Calibration on installation. (2) Configure thresholds of G-values, for 3 axes. (3) Configure recording interval for GPS and G-force.

• 
  Covert Trackings
• 
  Personal Securities
• 
  Container Trackings
• 
  G-Force Recorders
• 
  Trailer And Truck Trackings
• 
  Car Security
• 
  Car Security
• 
  Vehicle Trackers For Fleet Management

More