Shun Chuan Precision Machinery Co., Ltd.
Tel:886-37-741591 Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
Detail Information
Description :
?E.V.S models with auto lubrication system to headstock & external tank for cooling the oil.
?All models with one piece solid stand.
?All models with universal feed gearbox & reversable apron.
?All models meet CE. (on request)
?All models with 80mm (3.149") spindle bore, ASA D1-6.
?All models cross slide is hardened and ground to prolong operation life.
?All castings are properly stabilized and stress relieved.
?Bed ways are hardened & ground to min. HS-70.
?Turcite B coating between the bed and carriage.
?Extremely low noise level.
?Foot brake pedal provided.
?Built-in coolant pump & fitting provided.
?CSS (constant surface speed control) on request for E.V.S. model
?Wider bed way which give absorbs vibration.
Specification :
STANDARD ACCESSORIES:
- Backplate for 10" chuck
- Dead center MT.5
- Dead center MT.4 with carbide tip
- Spindle center sleeve........Ø85mm Taper 1/19.18
- Level pads......6 pcs
- Tool set & Box
- Operation manual & parts list
OPTIONAL ACCESSORIES:
- 3-Jaws scroll 10" chuck
- 4-Jaws independent 10" chuck
- 5C collet closer attachment
- 5C collets (metric or inch)
- Driving plate with dog
- Chuck safety guard
- Hydraulic copying attachment
- Tool post grinder attachment
- Taper turning attachment
- Electrical system for CE
- Protect cover on leadscrew for CE
- Steady rest w/ball bearing
- Follow rest w/bronze tip
- Faceplate 12"
- Drill chuck & arbor
- Rotating center MT.4
- Halogen lamp
- Quick change tool post
- Carriage micro stop set
- Digital read out system
- Full length splash guard
SPECIFICATIONS:
| MODEL | ML-1740 ML-1760 | ML-2040 ML-2060 | ML-1740V ML-1760V | ML-2040V ML-2060V | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Height of centers | 216 mm (8.5") | 254 mm (10") | 216 mm (8.5") | 254 mm (10") | |||||||||||||||||||||||||||||||
| Swing over bed | Ø435 mm (17") | Ø508 mm (20") | Ø435 mm (17") | Ø508 mm (20") | ||||||||||||||||||||||||||||||||
| Swing in gap | Ø622 mm (24.48") | Ø698 mm (27.48") | Ø622 mm (24.48") | Ø698 mm (27.48") | ||||||||||||||||||||||||||||||||
| Swing over cross slide | Ø277 mm (10.9") | Ø353 mm (13.89") | Ø277 mm (10.9") | Ø353 mm (13.89") | ||||||||||||||||||||||||||||||||
| Distance between centers | 1000 mm (40") | 1500 mm (60") | 1000 mm (40") | 1500 mm (60") | 1000 mm (40") | 1500 mm (60") | 1000 mm (40") | 1500 mm (60") | ||||||||||||||||||||||||||||
| Width of bed | 305 mm (12") | |||||||||||||||||||||||||||||||||||
| Gap width in front of faceplate | 195 mm (7.67") | |||||||||||||||||||||||||||||||||||
| Headstock and Main Spindle | Spindle nose, internal taper | D1-6, Ø85 mm Taper 1/19.18 | ||||||||||||||||||||||||||||||||||
| Spindle center sleeve | Ø85 mm Taper 1/19.18 x MT. No.5 | |||||||||||||||||||||||||||||||||||
| Spindle bore | Ø80 mm (3.149") | |||||||||||||||||||||||||||||||||||
| 12 steps / 36~1800 R.P.M.
|
| ||||||||||||||||||||||||||||||||||
| Carriage | Length on bed / Width of carriage | 440 mm (17.32") / 477 mm (18.77") | ||||||||||||||||||||||||||||||||||
| Cross slide travel | 235 mm (9.25") | 272 mm (10.7") | 235 mm (9.25") | 272 mm (10.7") | ||||||||||||||||||||||||||||||||
| Top slide travel | 160 mm (6.3") | |||||||||||||||||||||||||||||||||||
| Threads and Feeds | Whitworth threads: Kinds / Range | 45 Kinds / 2~72 T.P.I. | ||||||||||||||||||||||||||||||||||
| Metric threads: Kinds / Range | 39 Kinds / 0.2~14 mm | |||||||||||||||||||||||||||||||||||
| D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. | |||||||||||||||||||||||||||||||||||
| M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. | |||||||||||||||||||||||||||||||||||
| Longitudinal feeds | 0.04~1.0 mm (0.0015"~0.04") | |||||||||||||||||||||||||||||||||||
| Cross feeds | 0.02~0.5 mm (0.00075"~0.02") | |||||||||||||||||||||||||||||||||||
| Tailstock | Quill diameter | Ø59 mm (2.322") | ||||||||||||||||||||||||||||||||||
| Quill travel | 127 mm (5") | |||||||||||||||||||||||||||||||||||
| Taper of center | MT.No.4 | |||||||||||||||||||||||||||||||||||
| Motor | Main spindle | 7.5HP | AC 5.5kW (7.5HP), lnverter | |||||||||||||||||||||||||||||||||
| Forced lubrication for HD. | -- | 1/4HP | ||||||||||||||||||||||||||||||||||
| Coolant pump | 1/8HP | |||||||||||||||||||||||||||||||||||
| Measurement | Weight (Net /Gross) Approx. | 1700 kgs / 2000kgs | 1850 kgs / 2150kgs | 1750 kgs / 2050kgs | 1900 kgs / 2200kgs | 1700 kgs / 2000kgs | 1850 kgs / 2150kgs | 1750 kgs / 2050kgs | 1900 kgs / 2200kgs | |||||||||||||||||||||||||||
| Packing sizes | Length | 2400 mm (94.5") | 2900 mm (114.2") | 2400 mm (94.5") | 2900 mm (114.2") | 2400 mm (94.5") | 2900 mm (114.2") | 2400 mm (94.5") | 2900 mm (114.2") | |||||||||||||||||||||||||||
| Width x Height | Width 1155 mm (45.5") x Height 1900 mm (74.8") | |||||||||||||||||||||||||||||||||||
Specifications subject to change without notice.
Shun Chuan Precision Machinery Co., Ltd.
- Taiwan
- No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
- 886-37-741591
- 886-37-741593