Description :

XM-RM891 is 1 Port 10Gbps XFP Ethernet standard Test Module with high test quality & reliable test result. It can generate 64 sets of Rapid-Matrix stream traffic simultaneously per port for the test that is similar to real network condition.
1. Rapid-Matrix is a technique that can generate multi-streams traffic simultaneously with different kinds of frames/packets with almost any required protocol headers, tags and payload for each port, which is quite helpful for mass production test.
2. Unlike traditional test procedure at other test equipment, NuStreams-2000i and NuStreams-600i chassis with XM-RM series module cards are able to perform global command that actives multi-task tests to DUTs simultaneously. This mechanism synchronizes the test procedure to all devices under test; hence, the test duration of multi-task tests for all DUTs is reduced dramatically.
3. The SDFR (self-discover filtering rules) technique is able to capture packets by different criteria in either a unique value or a range of values by user-friendly UI, such as a MAC address or MAC addresses in specified range, and also shows the statistics in real-time.
4. Along with the advanced technology above, Xtramus provides several software applications such as NuWIN-RM, APMPT-4, and other ongoing software for XM-RM series that can test the network equipment in conformance, performance and stress purpose.

Specification :

1. Interface: (1) 10 Gigabit Ethernet (10GBASE-LR/SR): XFP port x 1. (2) Module port for connection to NuStreams Chassis. 2. LED Indicator: SYS, Link/Tx, Rx/Err, Capture, X-TAG. 3. Speed and Mode: (1) Auto Negotiation. (2) 10Gbps Full Duplex. 4. Frame Length(w/o VLAN Tag): Tx Packet Length: 48 ~ 2Kbyte. 5. Applications: (1) Test module for 10 Gigabit Ethernet device. (2) Test module for quality control of network device in mass production line. (3) Test module for new design network product in R&D laboratory that need report of precise statistics and result. (4) Apply to Telecommunication room, R&D laboratory, Data center, etc. 6. Capture Criteria: SDFR (self-discover filtering rules) technique is able to capture packets by different criteria in either a unique value or a range of values by user-friendly UI. (1) MAC Layer Event: 5. (2) Network Layer Event: 3. (3) SDFR Pattern (set): 2. (4) 2nd level CRC: Support.

Features :

1. Test module for 10 Gigabit Ethernet equipment with fiber connection.
2. 1 XFP fiber port per module and they are expandable with more module in the same chassis.
3. Rapid-Matrix function that can generate multi-stream traffic simultaneously per port for the test that is similar to real network condition.
4. Statistics analysis counters for received multi-stream traffic.
5. Xtramus's proprietary embedded tag, X-TAG for sequence check and latency measurement of packets per stream in Rapid-Matrix.
6. SDFR (Self-Discover Filtering Rules) technique that criteria for filter can be input directly without calculating mask.
7. Wirespeed generation and analysis of Layer 2-3 packets in 10 Gigabit Ethernet.
8. Generation and response to ARP and Ping for layer 3 testing.
9. Flexible Frame size from undersize to oversize frame can be generated and tested for different kinds of DUT.
10. Flexible contents (data) and length for the generation of packet payload.
11. Fully RMON counter and VLAN counter for analysis of test result after receiving of generated packets.
12. Verify oscillator's speed rate of DUT.

• 
  Burst Mode Matrix Modules
• 
  Rapid Matrix Modules
• 
  AC Power Meters
• 
  Burst Mode Martix Modules
• 
  Burst Mode Matrix Modules
• 
  Burst Mode Matrix Modules
• 
  Burst Mode Matrix Modules
• 
  Rapid Matrix Modules

More