Description :

Description:
Pulling Eye Fiber Optic Patch Cord LC MM Duplex can easily be damaged during installation because it's so fragile. Protect it from damage by choosing a cable with a pulling eye. The pulling eye ensures that the strength member of the cable is pulled instead of the fiber core or jacket. Here's the easy way to pull pre terminated fiber cable use the Pulling Eye kit, Pulling eye kits protect preterminated fiber optic cables during installation conduits, ducts or risers. Saving time and costs when install the pre-connectorized multi fiber cable.

Features:
Fibers are terminated with swivel pulling eyes to eliminate cable damage during installation.
Choose either a PVC or plenum jacket 6, 12, and 24fiber versions are available
All type connectors are available
Makes pulling cable through conduits easier

Specification :

Specifications:
    Attenuation (Maximum) : 3.75 dB/km @ 850 nm; 1.5 dB/km @1300 nm
    Bandwidth (Minimum) : 160 Hz/km @ 850 nm; 500 Hz/km @1300 nm
    Fiber Type : 62.5-µm core, 125-µm cladding
    Jacket Material : Orange PVC
    Conductor Material : 2.5/125-µm diameter, all-glass, graded-index optical fiber
    Bend Radius : 8 cm loaded, 5.3cm installed
    Tensile Strength : 225 lb. (1000 Newtons) short terms, 68 lb. (300 Newtons) long term
    Buffering Diameter : 900 µm
    Temperature Tolerance : Operating: (-40 to +80ºC);
    Storage: (-40 to +80ºC)
    Installation: (-40 to +50ºC)
    Outside Diameter : Lie on the patch cords inside the "tube"

• 
  LC Loopbacks
• 
  Fan-out Patch Cords
• 
  MPO Patch Cords
• 
  Mu Patch Cords
• 
  St Patch Cords
• 
  E2000 Patch Cords
• 
  FC Patch Cords
• 
  LC Patch Cords

More