TAILIFT CO., LTD.
Tel:886-49-2254300 Fax:886-49-2254302
Address:No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan
Detail Information
Description :
1.24/24/20 M/min. rapid traverse rates on X, Y, Z- axis are able to meet high speed machining requirements.
2.Z-axis is mounted with two pieces of 55 mm wide roller type linear ways, featuring high rigidity and heavy load resistance.
Specification :
| Item | Utit | VMC-168DH | VMC-188DH | |
|---|---|---|---|---|
| Travel | X-axis travel | mm | 1600 | 1800 |
| Y- axis travel | mm | 850 | 850 | |
| Z- axis travel | mm | 700 | 700 | |
| Spindle Nose to Table | mm | 150 ~ 850 | 150 ~ 850 | |
| Spindle Center to Column Face | mm | 930 | 930 | |
| Table | Working surface | mm | 1800 x 850 | 1900 x 850 |
| T-slots (width*number*pitch) | mm | 18 * 5 * 150 | 18 * 5 * 150 | |
| Max. table load | kg | 2000 | 2500 | |
| Spindle | Spindle speed | rpm | 10000 / 15000 | 10000 / 15000 |
| Transmission | Direct-drive | Direct-drive | ||
| Spindle nose taper | BBT50 / BBT40 | BBT50 / BBT40 | ||
| Feed | Rapid traverse (X,Y,Z-axis) | M/min | 24 / 24 / 20 | 24 / 24 / 20 |
| Cutting feed rate | M/min | 1 ~ 12 | 1 ~ 12 | |
| Auto Tool Changer | Tool storage capacity | pcs | 24 (32 Opt.) | 24 (32 Opt.) |
| Tool change time (tool to tool) | sec. | 3.5 | 3.5 | |
| Max. tool diameter / adj. empty tool | mm | 110 / 210 | 110 / 210 | |
| Max. tool length | mm | 300 | 300 | |
| Max. tool weight | kg | 15 | 15 | |
| Miscellaneous | Coolant tank capacity | L | 330 | 330 |
| Electric power required | KVA | 35 | 35 | |
| Air pressure required | kg/c㎡ | 6 | 6 | |
| Machine dimensions (W*L*H) | mm | 4260 x 4420 x 3390 | 4600 x 4420 x 3375 | |
| Machine weight | kg | 15500 | 15500 |
TAILIFT CO., LTD.
- Taiwan
- No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan
- 886-49-2254300
- 886-49-2254302