Multi-Spindle CNC Rotary Table
- 20200903143835
- Model No:
VRNC-125B-2W
- Product Description:
Complete machining in a single set up. Reduces production cycle times and increases productivity.
Single motor to control all axes, saves energy.
Avoids Requirement for Multi Clamping & Reduces tool changing requirements.
Can provide Pneumatic...
Direct-Drive High Speed Rotary Table
- 20200810155831
- Model No:
TDRT-500
- Product Description:
1. TDRT-500 rotary table, which uses torque motor, the rotation speed could achieve 120r.p.m. Performing high speed and high accuracy for elliptic arc machining application.
2. By using torque motor, Hosea rotary table is: 1.NO BACKLASH 2.NO WEAR OF...
CNC Index Table (Vertical And Horizontal Applications)
- 20200810155315
- Model No:
MINC-400R
- Product Description:
Fixed Angle Indexing Increments (1 or 5) CNC Controlled.
Triple Plate Clutch Structure: High Precision, Suitable for Heavy Machining.
Can handle high rigidity off center cutting.
Pallet Changer Does Not Rise during operation to maintain accuracy.
...
Hydraulic Index Table (Vertical Applications)
- 20200623162133
- Model No:
MIHC-255V
- Product Description:
Fixed Angle Indexing Increments, can be split into 2,3,4 up to 24 Increments.
Triple Plate Clutch Structure: High Precision, Suitable for Heavy Machining.
No Servo Motor Required. Uses Hydraulic Control System.
Rapid Angular Positioning
Hypoid Gear Rotary Table (Vertical & Horizontal Applications)
- 20200623161529
- Model No:
MPNC-320
- Product Description:
Using Hypoid gear design, high anti-wearing & low noise
Reduction gear not required. No temperature displacement, Employs a high torque motor for high transmission efficiency. Allows for adopting heat exchanger.
Backlash is controlled after ass...
CNC Tilting Rotary Table (Hydraulic System)
- 20200527105047
- Model No:
TRNC-500C
- Product Description:
Complex shapes or five faces is possible.
Servo motor position is not changed with shaft tilting to prevent vibration while cutting.
Absolute value motor are recommended for tilting axis.
Right Hand Type CNC Rotary Table
- 20200527105008
- Model No:
VRNC-170
- Product Description:
?0.001° Minimum Positioning Increment
?High Rigidity Structure: Disk and Shaft in a single piece – Increased Rigidity.
?Increased Wear Resistance –Worm Gear Drive Shaft
?High Precision Cross Roller Bearings
?Can Be Used in Vertical or Horizontal ...
Manual Tilting Rotary Table (Pneumatic System)
- 20200527104951
- Model No:
TVRNC-210
- Product Description:
Rotary table diameters 125, 170 and 210mm (Pneumatic clamping)
Manual tilting CNC rotary table
Exclusive dual lead worm drive
Suitable for 4-1/2 axis machining, such as cutting tool machining.
Tilting axis is able to be added Encoder
CNC Tilting Rotary Table
- 20200423184534
- Model No:
TDRT-320
- Product Description:
Reduction gear not required. No temperature displacement, Employs a high torque motor for high transmission efficiency. Allows for adopting hear exchanger.
Encoder equipped for high indexing accuracy.
Direct-drive motor offers high speed running-up...
CNC Direct Drive Rotary Table
- 20200423184512
- Model No:
DRT-125
- Product Description:
Direct-drive motor offers high speed running-up to 7 times faster than other ordinary models.
Reduction gear not required. No temperature displacement, Employs a high torque motor for high transmission efficiency. Allows for adopting hear exchanger....
Horizontal Pallet Changer
- 20200408155428
- Model No:
APC-H500
- Product Description:
Position cone x 4 for position and clamping worktable
Hydraulic teeth control the worktable exchange automatically
Running/Accuracy test 78 hours at least continually
According to design by DIN & ISO standard.
Hydraulic Indexing Table (Horizontal Applications)
- 20200408155343
- Model No:
MIHC-800H
- Product Description:
Fixed Angle Indexing Increments, can be split into 2,3,4 up to 24 Increments.
Triple Plate Clutch Structure: High Precision, Suitable for Heavy Machining.
No Servo Motor Required. Uses Hydraulic Control System.
Rapid Angular Positioning
Heavy Duty CNC Rotary Table (Horizontal Application)
- 20200408151231
- Model No:
HRNC-1650
- Product Description:
Worktable diameter ?1000、?1500mm (Vertical & Horizontal application)
Dual lead worm drive for greater transmission torque
Hydraulic clamping system assures powerful clamping.
Minimum indexing angle of 0.001°
Multi-Spindle CNC Rotary Table
- 20200408150546
- Model No:
MRNC-255R-2W
- Product Description:
Complete machining in a single set up. Reduces production cycle times and increases productivity.
Single motor to control all axes, saves energy.
Avoids Requirement for Multi Clamping & Reduces tool changing requirements.
Can provide Pneumatic...
Swing Rotary
- 20200408150013
- Model No:
UPNC-40
- Product Description:
Using Hypoid gear design, high anti-wearing & low noise
Backlash is controlled after assembling, don’t need to be adjusted for a long time and index accuracy is remained stably.
Swing table is suitable for any spindle from any brand, the clockw...
Left Hand Type CNC Rotary Table
- 20200408145720
- Model No:
VRNC-210L
- Product Description:
Motor is mounted at the left.
0.001° Minimum Positioning Increment
High Rigidity Structure: Disk and Shaft in a single piece – Increased Rigidity.
Increased Wear Resistance –Worm Gear Drive Shaft
High Precision Cross Roller Bearings
Can Be Used ...
Horizontal CNC Index Table
- 20200408145541
- Model No:
HINC-630S
- Product Description:
? Fixed Angle Indexing Increments (1 or 5) CNC Controlled.
? Triple Plate Clutch Structure: High Precision, Suitable for Heavy Machining.
? Can handle high rigidity off center cutting.
? Pallet Changer Does Not Rise during operation to maintain ac...
CNC Tilting Rotary Table (Hydraulic System)
- 20200408145255
- Model No:
TRNC-255A
- Product Description:
Servo motor position is not changed with shaft tilting to prevent vibration while cutting.
Absolute value motor are recommended for tilting axis.
Smart Direct-Drive Hydrostatic Rotary Table
- 20200408145100
- Model No:
HB-600
- Product Description:
High Precision & Longevity
Embedded Remote Monitoring System
User-friendly Display & Record Function
"Black Box" Design to Protect your Valuable Data and Recordings
Especially Suitable for High-Precision Grinding Operations and ...
Multi-spindle Tilting Rotary Table
- 20200408144829
- Model No:
TRNC-255-2W
- Product Description:
This Combines Complex 5 Axis Machining with Multiple Rotary Tables
This Delivers Counter Rotating Table Actions to Allow for the Simultaneous Machining of Left / Right Components for the Automotive Industry
Suitable for: Machining Automotive Indust...
